Openings That Fit Square and Seal Tight
Windows and Doors in Arlington for single-story brick homes with out-of-square openings built decades ago
Brick single-story homes built in Arlington and Mansfield decades ago often have openings that settled or were never framed square, so fitting a new window or door means shimming and adjusting the rough opening before the unit will set properly. JC Remodeling in Arlington installs interior and exterior doors and handles window and door work inside larger remodels, with the same contractor setting the frames, handling the trim and finishing the surrounding wall so the opening is sealed and painted as one job rather than split between two companies. You avoid scheduling delays and coordination problems when the frame, flashing and finish are managed by one crew.
The existing opening is measured and checked for square and plumb, the old unit is removed, and the rough opening is cleaned and adjusted. The new unit is set, shimmed, fastened and flashed, then trim, caulk and paint are finished once the unit is secured. In older construction, the framing lumber may have shifted or the masonry may have moved slightly, so the installer measures diagonals and checks level before fastening anything permanently.
Schedule a property evaluation to review your current openings and discuss replacement options.

What the Work Includes from Frame to Finish
JC Remodeling removes the existing door or window, cleans the rough opening, and adjusts framing as needed before the new unit is positioned. Shims are placed to bring the unit square and plumb, fasteners are driven through the jamb into framing, and flashing is installed around the exterior perimeter to direct water away from the opening. Because the same contractor handles the trim, caulk and paint, the transition between the new unit and the existing wall is sealed and finished without waiting on a second crew.
Once the installation is complete, you notice that the door or window operates smoothly without binding, the lock engages without forcing, and drafts or light gaps around the perimeter are eliminated. The trim sits flush against both the jamb and the wall, and caulk lines are tooled and painted to match the surrounding finish.
The work includes removal, opening adjustment, unit installation, exterior flashing, interior trim and paint. Structural modifications to widen or raise an opening are handled separately and require additional framing and wall repair.
Questions Before Starting Your Project
Older homes in Arlington often require opening adjustments before a new unit will fit, and these questions cover what happens during the installation and what to expect once the work is finished.
How is the rough opening checked before the new unit is installed?
The opening is measured across the width, height and both diagonals to confirm it is square, and a level is used to check that the jamb will sit plumb once the unit is shimmed and fastened.
What happens if the rough opening is not square?
Shims are placed behind the jamb at multiple points to bring the unit square and plumb, and in some cases the framing is adjusted or sistered to provide a solid fastening surface.
How is the exterior perimeter sealed after the unit is installed?
Flashing is installed around the outside of the frame to direct water away from the opening, and caulk is applied along the interior and exterior trim joints to seal gaps.
What should you notice once the door or window is installed?
The unit should open and close without binding, the lock should engage smoothly, and you should not see light or feel drafts around the perimeter when the door or window is closed.
Why does the same contractor handle trim and paint after installation?
Because JC Remodeling sets the frame and finishes the surrounding wall, the opening is sealed and painted as one job rather than being left for another company to complete, which avoids scheduling delays and ensures the trim fits tightly against both the jamb and the wall.
JC Remodeling also installs windows and doors in Grand Prairie, Fort Worth, Mansfield, Grapevine and Euless. JC Remodeling has over 20 years in remodeling and carries insurance for the work performed—arrange a consultation to discuss your window and door replacement needs.